Intercooler Pipe Fabrication

Silicone Parts Reinforced Silicone Couplers Silicone Couplet
Intake Parts




You are here: Home > Intake Leak Testers > Intake Pressure Tester, 3.0" - Black

Intake Pressure Testers for cars

Intake Pressure Tester

Intake Pressure Tester, 3.0" - Black

CAP000160 by Shaman Equipment

Retail Price: $49.99
You Save $15.00 (30%)

PRICE: $34.99

In stock - Ships within One Business Day

Use this Intake Leak Pressure Tester to make sure you get 100% performance from your turbo.

Intake leaks can overwork or even destroy a turbo and cause a rich or lean condition in the engine. To eliminate your intake leaks, simply attach this Intake Leak Pressure Tester to your turbo inlet and apply compressed air through the standard tire valve stem. You can listen for air leaks or spray soapy water in suspect areas - the soap will bubble if there is a leak.

Machined from silver-anodized aluminum, these pressure testers are the highest quality tool available. Since they utilize a 3-ply silicone reducer and high quality stainless steel t-bolt clamps, you can pressure test your intake to very high pressure levels.

Every Intake Leak Pressure Tester utilizes a 2.5" tester cap and a reducer to fit your turbo inlet size, so if you need to pressure test multiple turbos with different inlet sizes, you can just buy additional reducers.

Product includes everything shown and comes fully assembled.

Intake Pressure Tester

Review Summary

5.0 (based on 1 reviews)
100% of respondents would recommend this to a friend.
Write a Review
Reviewed by 1 customers Sort By:
By: mike m

From: Kansas
5.0 necessary for ANY turbo system 2020-04-03
Comments about Intake Pressure Tester, 3.0" - Black:
I have a MASS-AIR based turbo system. air leaks can cause all sorts of issues. This tool is required on any turbo system to make sure your couplers are tight and there are not any pin holes in cold side tubing. I was able to identify several problems with my cold side. I purchased this because couplers kept popping off during boost. When I started testing I could not get more than 16 psi in cold side (using tester), now I can fill to 30 PSI. I begin to say how awesome this product is for testing leaking system. Only thing I can say it would be nice if they offered one with gauge and sold them as a pair. one side for turbo and then one side for end of throttle body.
BOTTOM LINE? Yes, I would recommend this to a friend Was this review helpful? Yes / No